Mercury Elite 650 Pro Line Interactive UPS, 650VA Specifications and details

• Mercury Elite Line Interactive UPS
• Input voltage 220VAC
• Input frequency 50Hz
• Input phase. Single phase
• Input socket With Fuse Cold Start (0 to 100% load)
• Press the ON/OFF switch
• Input range (220V) 140V-300V
• Rating output (VA). 650VA
• Rating output (W). 390W
• Rating output (W).
• Battery mode(simulated sine wave),
• AC mode (sine wave)Power factor 0.6
• Rating voltage 220V
• Output range 220Vac-7% 15% (in battery mode)
• Rear Output Socket 2xUniversal –
• Battery backup.
• Transfer time TYPICAL 4-8 ms
• Communication Interface NIL
• Rating frequency 50Hz
• Output Frequency Line-mode Synchronize with the Utility.
• Battery mode 50 Hz±1Hz
• Output Frequency Line Mode Synchronize with the utility
• Short Circuit Protection Line Mode FUSE & firmware protection.
• Battery Mode Software protection controlled by firmware
• Overload Protection Line Mode 110% -5% (Go to fault mode after 5 minutes), 120% -5% (Go to fault mode immediately)
• Battery Mode 110% -5% (Shutdown after 5 minutes)120% -5% (Shut down immediately).
• Rating frequency 12V/8.2AH x 1
• Backup Tim – Typical 10mins to 18mins(depending on load)
• Charge Current About 1A at normal mode
• Over Charge Protection 14.5V /- 0.2V stop charging
• Weight 5.6kg /- 0.3Kg
• Dimension 390x 145 x 220 (mm)
• Master Carton 45.5x 40 x 23.5 (cm) (4pcs).